Playstation 3 mac address range

The above method works well, but sometimes it may not be so easy to distinguish your devices from intruders if there are any. So you may feel more safe by manually entering in the MAC addresses of your devices, or at least verifying them yourself. Here is how to verify the MAC address on common devices:. Every network device has a unique MAC address assigned to it by its manufacturer.

How to Manually Assign an IP address in Your Router

However, it is important to note that there is something called MAC address spoofing that can cause a security risk. There is software out there that will allow people to spoof or even change MAC addresses on their devices.

If someone were to obtain a MAC address on your list of authorized MAC addresses, they would technically be able to spoof the MAC address of their device so the router thinks it is a legitimate, authorized device. This information is not to say that using a MAC address filter is not a good security practice.

Finding the MAC address on different devices

It is actually very useful and effective in keeping the majority of people out. This goes to show that multiple layers of security is the best way to go. There are ways around almost any security measure you can implement. Network Settings should be at the very bottom of the list.

Game Console - Locating the MAC address

Step 3: After you have selected Network Setting, move to the right and select Settings and Connection Status List in the list that comes up. You will use same Subnet Mask, and Default Router down below. You will change the last octet of the IP Address and enter it below as well. More on how to do that later. Go ahead and go back to the Netowrk Settings menu. Step 5: After you have selected Network Setting, move to the right and select Internet Connection Settings in the list that comes up.

How do I get an IP address for my PS3?

Step 6: An short message will pop up. Press Ok to move on. Step 7: Select Custom for the setup method. Step 8: On the next page select Wired or Wireless connection depending upon how your PS3 is connected to your network. Step 9: We are going to setup this connection manually so we can forward ports to your PS3. So select Manual Settings.

Step Auto-Detect the speed and duplex settings.

Game Console - Locating the MAC address

Step Enter the the ip address you want to use for your PS3 into this page. It's important to choose an ip address that not in your router's dhcp range. You can check this by login in to your router and looking at it's dhcp or LAN page.

Alternatively you can just pick an ip address that is not close to the ip address we found earlier. For instance if your PS3 was using something like If your PS3 was using something like Only the last group of numbers on the ip address should change, and that group of numbers would range from 2 to Please, don't over think this just pick a number and go with it. I have just tried to provide some guidelines here so you can pick a better number.

Enter the Default Gatway and Subnet Mask we wrote down earlier. This is usually required when your network's router is not passing the dns server information to the computers that have static ip address properly.

The easiest way to do this is to give your ISP a call. They will probably ask you why you need them. Tell them the truth, your PS3 is requesting them.


  • Connecting the Playstation® 4 to the Internet wirelessly.
  • Bluetooth Controller · RetroPie/RetroPie-Setup Wiki · GitHub.
  • first day of my life mac miller download.

They should give you two ip addresses, one for the primary dns server and one for the secondary dns server. The only time you need to setup proxy server settings is when you connect through a proxy server. If you were doing that, you would have been given specific instructions from your isp on how to setup this section.

UPNP should be turned off so it doesn't try to use it, instead of your port forwarding configuration. If it is not then you have made an error in setting up the static ip address for your PS3.